It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
TR: Underworld freezing right after the end of the prologue
No posts in this topic were marked as the solution yet. If you can help, add your reply
Something that should help :
Go to AUDIO/VISUAL
At Display Mode Selection, set the Refresh Rate to 60 then go back
At Display Settings, set " VSync " to ON

Doing this should help.

If it does not help, still set Vsync to ON and Refresh Rate to 60 , then i highly suggest to turn off every graphic options in case one is the source of the freeze you are experiencing

If it works, you can re-enable some graphic options to see if you spot which one is a problem.
Try with a lower resolution too, like 1280x720 that should help too

With the settings on the attached screenshot i don't get a freeze in chapter changes
Attachments:
untitled.png (86 Kb)
Post edited March 07, 2025 by Sanc
avatar
Sanc: Something that should help :
Go to AUDIO/VISUAL
At Display Mode Selection, set the Refresh Rate to 60 then go back
At Display Settings, set " VSync " to ON

Doing this should help.

If it does not help, still set Vsync to ON and Refresh Rate to 60 , then i highly suggest to turn off every graphic options in case one is the source of the freeze you are experiencing

If it works, you can re-enable some graphic options to see if you spot which one is a problem.
Try with a lower resolution too, like 1280x720 that should help too

With the settings on the attached screenshot i don't get a freeze in chapter changes
I have same issue, too. But your solution doesn't solve the problem. When Lukas shot Lara the screen is getting white, a music (opera like) plays in repeat mode and nothing happens.
Actually I solved it by reducing refresh rate to 50 within Display Settings. After loading scene on the boat, I changed the resolution to 1920x1080 and rate to 60 and everything works fine. I will reply again on this topic if I will have issue again.