It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
Watch out. I have seen two problems with resistances.

1. I had resistances reset completely. Not sure if it is related to what I was doing. Story below.

2. When adding resistances, other resistances get lower. This is weird.


I had biohazard at 100% and plenty of bio points. I found a radiation area so I though I start to increase radiation resistance. When I did that, my biohazard resistance went down.

Other bizarre behaviour was when I had first time 6 points and second time 12, both time same behaviour. And I had only upgraded biohazard. Heat, cold and radiation, each was 1 point. If I selected one +10% for each, I was out of bio points, although that should have been only 3 points. Then I reloaded a save and tried again, but just heat. Could click it twice and I was out of bio points. I tried again and clicked radiation a few times, which worked but all other resistances went down. I had 0 heat, 0 cold and ... 27% biohazard. Less than 30% anyway.

But when all resistances reset, I am not sure if it was because of the situation I was in or if this is more common than that. I hadn't really put anything to any resistance. Came across with my first area that requires some resistance. Biohazard. Then I found a second one. Ok, time to put all my points in biohazard. Ran in, found some enemies, beat one, ran back outside to get the toxicity down. Back in, killed one, got bio glob or whatever that is, ran out, got the toxicity down, When I cleared the first patch of enemies I noticed you can stand in a puddle and get the biohazard down, so I ventured deeper and little by little managed to get resistance to 100%. I found the biohazard pool where you can change your appearance, did that. Was going out of the area and thought before I do, first I put some to other resistances since I now had some extra bio material. Added +10% to the other three, thought it was odd that also biohazard showed an active button instead of the greyed out one, got out of the menu and... my biohazard level was going up like crazy! Back to menu: all resistances 0.

It really looks like there is something really wrong with the resistances.

Anyway, I could not find a way to get the resistances back. Going back to a previous save was the only possibility I could come up with. Remember to save before doing anything with the resistances.
Post edited May 30, 2021 by frogthroat
avatar
frogthroat: Watch out. I have seen two problems with resistances.

1. I had resistances reset completely. Not sure if it is related to what I was doing. Story below.

2. When adding resistances, other resistances get lower. This is weird.


I had biohazard at 100% and plenty of bio points. I found a radiation area so I though I start to increase radiation resistance. When I did that, my biohazard resistance went down.

Other bizarre behaviour was when I had first time 6 points and second time 12, both time same behaviour. And I had only upgraded biohazard. Heat, cold and radiation, each was 1 point. If I selected one +10% for each, I was out of bio points, although that should have been only 3 points. Then I reloaded a save and tried again, but just heat. Could click it twice and I was out of bio points. I tried again and clicked radiation a few times, which worked but all other resistances went down. I had 0 heat, 0 cold and ... 27% biohazard. Less than 30% anyway.

But when all resistances reset, I am not sure if it was because of the situation I was in or if this is more common than that. I hadn't really put anything to any resistance. Came across with my first area that requires some resistance. Biohazard. Then I found a second one. Ok, time to put all my points in biohazard. Ran in, found some enemies, beat one, ran back outside to get the toxicity down. Back in, killed one, got bio glob or whatever that is, ran out, got the toxicity down, When I cleared the first patch of enemies I noticed you can stand in a puddle and get the biohazard down, so I ventured deeper and little by little managed to get resistance to 100%. I found the biohazard pool where you can change your appearance, did that. Was going out of the area and thought before I do, first I put some to other resistances since I now had some extra bio material. Added +10% to the other three, thought it was odd that also biohazard showed an active button instead of the greyed out one, got out of the menu and... my biohazard level was going up like crazy! Back to menu: all resistances 0.

It really looks like there is something really wrong with the resistances.

Anyway, I could not find a way to get the resistances back. Going back to a previous save was the only possibility I could come up with. Remember to save before doing anything with the resistances.
I was reading on the reddit sub r/biomutant that someone had a bug where they used the biopool to change there appearance and it had reset there resistance to zero. they reloaded and used the pool again and it didnt reset there resistance. odd bug.
avatar
nahtanod: I was reading on the reddit sub r/biomutant that someone had a bug where they used the biopool to change there appearance and it had reset there resistance to zero. they reloaded and used the pool again and it didnt reset there resistance. odd bug.
Makes sense. The reset happened to me right after the biopool as well.
avatar
frogthroat: Watch out. I have seen two problems with resistances.

1. I had resistances reset completely. Not sure if it is related to what I was doing. Story below.

2. When adding resistances, other resistances get lower. This is weird.


I had biohazard at 100% and plenty of bio points. I found a radiation area so I though I start to increase radiation resistance. When I did that, my biohazard resistance went down.

Other bizarre behaviour was when I had first time 6 points and second time 12, both time same behaviour. And I had only upgraded biohazard. Heat, cold and radiation, each was 1 point. If I selected one +10% for each, I was out of bio points, although that should have been only 3 points. Then I reloaded a save and tried again, but just heat. Could click it twice and I was out of bio points. I tried again and clicked radiation a few times, which worked but all other resistances went down. I had 0 heat, 0 cold and ... 27% biohazard. Less than 30% anyway.

But when all resistances reset, I am not sure if it was because of the situation I was in or if this is more common than that. I hadn't really put anything to any resistance. Came across with my first area that requires some resistance. Biohazard. Then I found a second one. Ok, time to put all my points in biohazard. Ran in, found some enemies, beat one, ran back outside to get the toxicity down. Back in, killed one, got bio glob or whatever that is, ran out, got the toxicity down, When I cleared the first patch of enemies I noticed you can stand in a puddle and get the biohazard down, so I ventured deeper and little by little managed to get resistance to 100%. I found the biohazard pool where you can change your appearance, did that. Was going out of the area and thought before I do, first I put some to other resistances since I now had some extra bio material. Added +10% to the other three, thought it was odd that also biohazard showed an active button instead of the greyed out one, got out of the menu and... my biohazard level was going up like crazy! Back to menu: all resistances 0.

It really looks like there is something really wrong with the resistances.

Anyway, I could not find a way to get the resistances back. Going back to a previous save was the only possibility I could come up with. Remember to save before doing anything with the resistances.
A third problem. Since the patch resistances chosen at initial character creation dont show up at all. Ever.