Posted October 10, 2015
rtcvb32
echo e.lolfiu_fefiipieue|tr valueof_pi [0-9]
rtcvb32 Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Aug 2013
From United States
tammerwhisk
Commageddon
tammerwhisk Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Dec 2010
From United States
Posted October 10, 2015
hedwards: <snip>
TL:DR the people who think the metric system is more logical or easier are mostly people who don't understand how the imperial system works , have never paid attention to what they're doing with the measurements or haven't used both systems long enough to get comfortable with them. In the years I was using the metric system, it never made anything I was doing easier, except for science. Outside of science, the metric system doesn't make anything easier. Most of the time it's a draw, but when it's not a draw the imperial measures usually win.
hedwards: Honestly, it really doesn't. For science and technology, it does, however for daily living it doesn't. And that makes sense, the imperial measures were pretty much invented for things people do in daily living. The SI units that the metric system uses were designed for science.
The result is that imperial measures suck balls for science and the metric system is rarely the easiest system of measure for daily living.
So much this. Metric all the way for things that require precision, imperial for general use and or approximations. If I'm doing something with science or something technical yeah I'll want the temperature in metric, but if I want to know the ambient temperature of a building or the outdoors I definitely don't want to have to fuck with decimals and negatives. TL:DR the people who think the metric system is more logical or easier are mostly people who don't understand how the imperial system works , have never paid attention to what they're doing with the measurements or haven't used both systems long enough to get comfortable with them. In the years I was using the metric system, it never made anything I was doing easier, except for science. Outside of science, the metric system doesn't make anything easier. Most of the time it's a draw, but when it's not a draw the imperial measures usually win.
hedwards: Honestly, it really doesn't. For science and technology, it does, however for daily living it doesn't. And that makes sense, the imperial measures were pretty much invented for things people do in daily living. The SI units that the metric system uses were designed for science.
The result is that imperial measures suck balls for science and the metric system is rarely the easiest system of measure for daily living.
-------------------------------
Also, whoever came up with dd/mm/yyyy has my eternal scorn. It is without a doubt the least useful order in popular usage (especially since the possible values can very by month and year).
LevityInGaming
Just because we disagree doesnt mean I hate you.
LevityInGaming Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Oct 2008
From United States
Posted October 10, 2015
Marioface5: I think the reason for the difference in how people list dates has to do with how one thinks about it. A year is longer than a month, which is longer than a day. Thinking of it that way, D/M/Y makes sense. However, another way of looking at it is that there's an indefinite amount of years, up to 31 days in a month, and only 12 months in a year. With that viewpoint, M/D/Y makes more sense.
monkeydelarge: Both D/M/Y and M/D/Y make equal sense but the USA was being silly to not just be like the rest of the world when it comes to dates. It's like the USA was trying too hard to be different just to look cool. Like wearing shorts with a jacket, having a green mullet and wearing your sunglasses at night while also claiming to be a vampire. tammerwhisk
Commageddon
tammerwhisk Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Dec 2010
From United States
hedwards
buy Evil Genius
hedwards Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Nov 2008
From United States
Posted October 10, 2015
hedwards: <snip>
TL:DR the people who think the metric system is more logical or easier are mostly people who don't understand how the imperial system works , have never paid attention to what they're doing with the measurements or haven't used both systems long enough to get comfortable with them. In the years I was using the metric system, it never made anything I was doing easier, except for science. Outside of science, the metric system doesn't make anything easier. Most of the time it's a draw, but when it's not a draw the imperial measures usually win.
Honestly, it really doesn't. For science and technology, it does, however for daily living it doesn't. And that makes sense, the imperial measures were pretty much invented for things people do in daily living. The SI units that the metric system uses were designed for science.
The result is that imperial measures suck balls for science and the metric system is rarely the easiest system of measure for daily living.
tammerwhisk: So much this. Metric all the way for things that require precision, imperial for general use and or approximations. If I'm doing something with science or something technical yeah I'll want the temperature in metric, but if I want to know the ambient temperature of a building or the outdoors I definitely don't want to have to fuck with decimals and negatives. TL:DR the people who think the metric system is more logical or easier are mostly people who don't understand how the imperial system works , have never paid attention to what they're doing with the measurements or haven't used both systems long enough to get comfortable with them. In the years I was using the metric system, it never made anything I was doing easier, except for science. Outside of science, the metric system doesn't make anything easier. Most of the time it's a draw, but when it's not a draw the imperial measures usually win.
Honestly, it really doesn't. For science and technology, it does, however for daily living it doesn't. And that makes sense, the imperial measures were pretty much invented for things people do in daily living. The SI units that the metric system uses were designed for science.
The result is that imperial measures suck balls for science and the metric system is rarely the easiest system of measure for daily living.
-------------------------------
Also, whoever came up with dd/mm/yyyy has my eternal scorn. It is without a doubt the least useful order in popular usage (especially since the possible values can very by month and year).
If the metric system were better, the US likely would have been one of the first to use it. We were one of the first countries to adopt metric currency and we were one of the first to adopt the SI for our standards. But, over a century later and we pretty much just use metric measurements for medicine and not much else.
Hell, we switched all our trains over to standard gauge tracks even though it was a massive undertaking.
Ultimately, I don't personally care what units of measure are used various places, I just get a tad annoyed when folks act like metric is better for daily living, because it's not.
@('_')@
Sorry, data for given user is currently unavailable. Please, try again later. View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Sep 2012
From United States
Posted October 10, 2015
Yeah, the Twilight series totally killed the vampire image permanently. Humanity will probably have to wait 100 years before the vampire image becomes cool again.
Elenarie
@tweetelenarie
Elenarie Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Sep 2008
From Sweden
johnnygoging
I was told there would always be a bigger fish
johnnygoging Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Jun 2013
From Canada
Posted October 10, 2015
tammerwhisk: So much this. Metric all the way for things that require precision, imperial for general use and or approximations. If I'm doing something with science or something technical yeah I'll want the temperature in metric, but if I want to know the ambient temperature of a building or the outdoors I definitely don't want to have to fuck with decimals and negatives.
-------------------------------
Also, whoever came up with dd/mm/yyyy has my eternal scorn. It is without a doubt the least useful order in popular usage (especially since the possible values can very by month and year).
hedwards: I can understand why people would assume that metric is more logical, but I challenge those folks to pay attention to what they're using the measurements for. Chances are good that they'll come to the right conclusion eventually. -------------------------------
Also, whoever came up with dd/mm/yyyy has my eternal scorn. It is without a doubt the least useful order in popular usage (especially since the possible values can very by month and year).
If the metric system were better, the US likely would have been one of the first to use it. We were one of the first countries to adopt metric currency and we were one of the first to adopt the SI for our standards. But, over a century later and we pretty much just use metric measurements for medicine and not much else.
Hell, we switched all our trains over to standard gauge tracks even though it was a massive undertaking.
Ultimately, I don't personally care what units of measure are used various places, I just get a tad annoyed when folks act like metric is better for daily living, because it's not.
also, ounces aren't used. grams are. alongside lbs. hopefully it'll be entirely metric in a few more years.
Post edited October 10, 2015 by johnnygoging
hedwards
buy Evil Genius
hedwards Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Nov 2008
From United States
Posted October 10, 2015
hedwards: Ultimately, I don't personally care what units of measure are used various places, I just get a tad annoyed when folks act like metric is better for daily living, because it's not.
Elenarie: The whole world must be stupid then, except for United States, Burma and Liberia. -_- Anyways, the US was pretty much the only place in the world with a functioning system of measure. We had the Bureau of Weights and Measures that went out and confiscated scales and measuring devices that weren't in compliance with the standards.
And BTW, you've left China off the list. China isn't a metric country. They use 3 different systems of measure depending upon the context. Most of the time things are metric, but good luck trying to buy clothes in metric sizes, that's all imperial measure.
hedwards: I can understand why people would assume that metric is more logical, but I challenge those folks to pay attention to what they're using the measurements for. Chances are good that they'll come to the right conclusion eventually.
If the metric system were better, the US likely would have been one of the first to use it. We were one of the first countries to adopt metric currency and we were one of the first to adopt the SI for our standards. But, over a century later and we pretty much just use metric measurements for medicine and not much else.
Hell, we switched all our trains over to standard gauge tracks even though it was a massive undertaking.
Ultimately, I don't personally care what units of measure are used various places, I just get a tad annoyed when folks act like metric is better for daily living, because it's not.
johnnygoging: the metric system is better. as somebody who grew up in a country with both, that measures weight and lengths in lbs and inches except for liquids in ml and small distances in cm, I have constantly gravitated to metric even where subsidiary to imperial because it's just better. If the metric system were better, the US likely would have been one of the first to use it. We were one of the first countries to adopt metric currency and we were one of the first to adopt the SI for our standards. But, over a century later and we pretty much just use metric measurements for medicine and not much else.
Hell, we switched all our trains over to standard gauge tracks even though it was a massive undertaking.
Ultimately, I don't personally care what units of measure are used various places, I just get a tad annoyed when folks act like metric is better for daily living, because it's not.
also, ounces aren't used. grams are. alongside lbs. hopefully it'll be entirely metric in a few more years.
When's the last time you needed to increase or reduce batch by a factor of 10? Doing the more typical double and half batches of things with imperial measures is ridiculously easy.
Like I've said, I have yet to come across a situation where something is genuinely easier to do with metric measures other than in the sciences. People get used to kludging around with metric approximations and don't realize just how much extra work it is.
Post edited October 10, 2015 by hedwards
JMich
A Horrible Human Person. If you need me, chat.
JMich Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Apr 2011
From Greece
Posted October 10, 2015
hedwards: I take it you don't do any cooking or have to divide things amongst friends. These are things that are commonly done and they're a nightmare when with metric measures. It's trivial to make half a batch of something with imperial measure and a real PITA if you wish to do it via metric measures.
Wait, what? I'd say get a better recipe book then. A country that uses system A (no matter what said system is) for measurements will have recipes and groceries that use that system as well. If you try to translate from one system to the other, you will encounter trouble, but a recipe that calls for weights in a specific system will usually go for the easily measurable denominations.
Take a look at this apple pie (or apple cake) recipe. To translate the ingredients it uses, it says:
1/2 kg diced apples
1/2 kg all purpose flour
1 satchel baking powder
1 teaspoon soda
1 1/2 teaspoons cinnamon clover (no idea)
orange zest
1 vanilla
4 eggs
1 glass olive oil
1 glass orange juice
1 glass sugar
How to divide that by half? Quarter of kilo, half a glass. How to multiply by 2? 1kg, 2 glasses. How to convert to imperial? Good luck.1/2 kg all purpose flour
1 satchel baking powder
1 teaspoon soda
1 1/2 teaspoons cinnamon clover (no idea)
orange zest
1 vanilla
4 eggs
1 glass olive oil
1 glass orange juice
1 glass sugar
rtcvb32
echo e.lolfiu_fefiipieue|tr valueof_pi [0-9]
rtcvb32 Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Aug 2013
From United States
Posted October 10, 2015
hedwards: When's the last time you needed to increase or reduce batch by a factor of 10? Doing the more typical double and half batches of things with imperial measures is ridiculously easy.
You know, if we all used the metric system likely a good number of the formulas would probably be written and considered with doubling and whatnot in mind. Besides, if you do decide to double, double & a half, triple the recipe, you'll probably quickly do the math, write notes on a card for the new amounts and go with that (and reasonable rounding as appropriate).
Besides as with intermediate systems, i wouldn't doubt they could come up with a 'cup' being 250ml if that amount is used fairly often, or for length having a 'foot' as 25cm.
I suppose we could instead make an intermediates between each level so instead of x10 it's x5....
johnnygoging
I was told there would always be a bigger fish
johnnygoging Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Jun 2013
From Canada
Posted October 11, 2015
hedwards: Well, if I took posts like this as an example...
Anyways, the US was pretty much the only place in the world with a functioning system of measure. We had the Bureau of Weights and Measures that went out and confiscated scales and measuring devices that weren't in compliance with the standards.
And BTW, you've left China off the list. China isn't a metric country. They use 3 different systems of measure depending upon the context. Most of the time things are metric, but good luck trying to buy clothes in metric sizes, that's all imperial measure.
When's the last time you needed to increase or reduce batch by a factor of 10? Doing the more typical double and half batches of things with imperial measures is ridiculously easy.
Like I've said, I have yet to come across a situation where something is genuinely easier to do with metric measures other than in the sciences. People get used to kludging around with metric approximations and don't realize just how much extra work it is.
when cooking I do all of my measurements in metric and have never had a problem. 1/3 cup in metric is 80 ml. (83) Anyways, the US was pretty much the only place in the world with a functioning system of measure. We had the Bureau of Weights and Measures that went out and confiscated scales and measuring devices that weren't in compliance with the standards.
And BTW, you've left China off the list. China isn't a metric country. They use 3 different systems of measure depending upon the context. Most of the time things are metric, but good luck trying to buy clothes in metric sizes, that's all imperial measure.
johnnygoging: the metric system is better. as somebody who grew up in a country with both, that measures weight and lengths in lbs and inches except for liquids in ml and small distances in cm, I have constantly gravitated to metric even where subsidiary to imperial because it's just better.
also, ounces aren't used. grams are. alongside lbs. hopefully it'll be entirely metric in a few more years.
hedwards: I take it you don't do any cooking or have to divide things amongst friends. These are things that are commonly done and they're a nightmare when with metric measures. It's trivial to make half a batch of something with imperial measure and a real PITA if you wish to do it via metric measures. also, ounces aren't used. grams are. alongside lbs. hopefully it'll be entirely metric in a few more years.
When's the last time you needed to increase or reduce batch by a factor of 10? Doing the more typical double and half batches of things with imperial measures is ridiculously easy.
Like I've said, I have yet to come across a situation where something is genuinely easier to do with metric measures other than in the sciences. People get used to kludging around with metric approximations and don't realize just how much extra work it is.
it is true that imperial is easier with smaller numbers and simpler operations. it has its roots in very old measurements systems. but metric is far more reliable and versatile once you have the hang of it.
tammerwhisk
Commageddon
tammerwhisk Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Dec 2010
From United States
Posted October 11, 2015
johnnygoging: when cooking I do all of my measurements in metric and have never had a problem. 1/3 cup in metric is 80 ml. (83)
it is true that imperial is easier with smaller numbers and simpler operations. it has its roots in very old measurements systems. but metric is far more reliable and versatile once you have the hang of it.
That is exactly why both systems have their uses. For general use and approximations imperial is infinitely easier to relay (for most usage you will be dealing with 1-2 positive digits and maybe the occasional fraction). For scientific, technical, or any that requires precision though metric is definitely the way to go. it is true that imperial is easier with smaller numbers and simpler operations. it has its roots in very old measurements systems. but metric is far more reliable and versatile once you have the hang of it.
In the US we learn both and the common conversions, the only reason a lot of people don't know/use metric is because post-schooling a lot of people never have a real reason to use metric (and thus forget from disuse) unless one is in a scientific or technical field the precision is unnecessary. For general trivial things dealing with a decimal and sometimes negatives is a pain in the ass.
For example the outdoor temperature with the metric system negatives and decimals come up all the time, with Fahrenheit there are "more degrees" within the range humans typically inhabit for many locales negatives are rarely used and decimals are never needed generally.
Celsius "normal outdoor temperature ranges": -17.77~C to 37.77~C
Fahrenheit "normal outdoor temperature range": 0 to 100
(ignoring extremes)
shadowknight2814
New User
shadowknight2814 Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Mar 2011
From United States
Fomalhaut30
Not foruming
Fomalhaut30 Sorry, data for given user is currently unavailable. Please, try again later. View profile View wishlist Start conversation Invite to friends Invite to friends Accept invitation Accept invitation Pending invitation... Unblock chat Registered: Mar 2009
From United States
Posted October 11, 2015
There's a real simple reason why the United States will not go full metric. It's because of our roads. The US has almost 4.1 million miles of roadways (the only Euro country in the top 10 is France with about 15% of our amount of roadways). We would have to replace all the mile marker signs, speed limit signs, distance signs, and on/off ramp signs (since those tend to be based on mileage). That would be an unbelievable cost for something that has little to no practical usage in that area. No politician is going to be on board with such an expenditure when we have a hard enough time just keeping the roads repaired.
Then there's the fact that our legal land descriptions are based upon miles and our legal survey markers are based in feet and miles. All of that stuff would have to be converted at an enormous cost.
Then there's the fact that our legal land descriptions are based upon miles and our legal survey markers are based in feet and miles. All of that stuff would have to be converted at an enormous cost.