Posted May 14, 2021
Hi everyone, i'm having a horrible performance since release date, and support is not able to help me further. My GPU is not running cyberpunk as it should. Usage is too low and it has several drops while playing. When i stay quiet i have 55 fps, once i start moving it goes to 30 :(. THIS HAPPEN WITH EVERY SETTINGS, for example 720p on low ...
My specs are: ryzen 7 1700, RTX 3070, 16 gb ddr4 2666 mhz, asus prime b450 plus, game on ssd. I have replaced almost my entire setup, power supply, motherboard, gpu and ssd, so i cannot understand what is happening.
EDIT1: I just can hit 100%GPU usage on 4k, any other resolution 65-30%. My CPU is always around 60%. Even with overclock. There is an image running 720p low settings. It has no sense for me. On 4k i can get a decent performance with some drops under 30 but more or less constant around 35 fps. Once i change resolution it comes the chaos.
Everything is up to date and the cpu seems to work fine, 3800 on Cinebench r20.
Is it normal that CP2077 just use 2.8 Gb of RAM?? Maybe there is something there increassing the frametime because cpu has to acces ROM, could be?
---> EDIT2: I have a new Ryzen 3700x a little bit overclocked. Here are the results in 2k preset ultra(newcpu.jpg)
Cpu use still around 60% ( stock mode has the same performance in the game as overclocked one). Are these results normal?
It reaches 34 fps min and 54 max.
I should be playing 4k ultra without problem with this setup right?
When i turn on rtx it comes the real hell, even on low and low resolutions the performance is horrible.
Ofc i had done a clean windows install.
Thanks for your help!!
My specs are: ryzen 7 1700, RTX 3070, 16 gb ddr4 2666 mhz, asus prime b450 plus, game on ssd. I have replaced almost my entire setup, power supply, motherboard, gpu and ssd, so i cannot understand what is happening.
EDIT1: I just can hit 100%GPU usage on 4k, any other resolution 65-30%. My CPU is always around 60%. Even with overclock. There is an image running 720p low settings. It has no sense for me. On 4k i can get a decent performance with some drops under 30 but more or less constant around 35 fps. Once i change resolution it comes the chaos.
Everything is up to date and the cpu seems to work fine, 3800 on Cinebench r20.
Is it normal that CP2077 just use 2.8 Gb of RAM?? Maybe there is something there increassing the frametime because cpu has to acces ROM, could be?
---> EDIT2: I have a new Ryzen 3700x a little bit overclocked. Here are the results in 2k preset ultra(newcpu.jpg)
Cpu use still around 60% ( stock mode has the same performance in the game as overclocked one). Are these results normal?
It reaches 34 fps min and 54 max.
I should be playing 4k ultra without problem with this setup right?
When i turn on rtx it comes the real hell, even on low and low resolutions the performance is horrible.
Ofc i had done a clean windows install.
Thanks for your help!!
Post edited June 24, 2021 by ambrojo