Posted June 16, 2017
Set current directory to /home/mal/GOG Games/StarCrawlers/game
Found path: /home/mal/GOG Games/StarCrawlers/game/starcrawlers.x86_64
Mono path[0] = '/home/mal/GOG Games/StarCrawlers/game/starcrawlers_Data/Managed'
Mono path[1] = '/home/mal/GOG Games/StarCrawlers/game/starcrawlers_Data/Mono'
Mono config path = '/home/mal/GOG Games/StarCrawlers/game/starcrawlers_Data/Mono/etc'
displaymanager : xrandr version warning. 1.4
client has 5 screens
displaymanager screen (0)(LVDS1): 1600 x 900
Using libudev for joystick management
Importing game controller configs
then back to the prompt. I'm relatively new to Linux (set this USB key up about a year or so ago but haven't done much with it until now) so I'm a little stuck from here. Getting a report from xranr (-q -v) gets me:
xrandr program version 1.4.1
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 32767 x 32767
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 214mm
1600x900 60.0*+
1440x900 59.9
1360x768 59.8 60.0
1152x864 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
VGA-1-2 connected
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
1024x768 (0x43) 65.0MHz
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x44) 40.0MHz
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x45) 36.0MHz
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
Any ideas how I can get this working? I don't currently have (and won't for a few months at least) a working Windows machine.
Since you are running Linux Mint from USB flash drive: are you using a live system (system settings and changes to the drive are not saved), or a persistent installation (everything is saved between reboots)?
We strongly recommend that you install your Linux system on a hard drive or SSD, because a live installation:
- doesn't allow you to install NVIDIA video card drivers, and you use the integrated Intel card by default
- by default does not store any changes you make to the system, including installed games and their saves
If it's not possible, we'll try to help you anyway. Could you attach your system report? It can be generated by using the script present in the game installation directory. Please also provide the game log, you will find it in: $HOME/.config/unity3d/Juggernaut Games/StarCrawlers/Player.log
You can also contact our support here: https://support.gog.com/
Post edited June 16, 2017 by linuxvangog