Posted June 06, 2011
Is there a way to remap the joystick buttons? By default, none seem to be the Missile Launch button :(
This question / problem has been solved by Patryn
Bojamijams
New User
Registered: Feb 2011
From Canada
pnptcn
noo uzar
Registered: Jul 2009
From United States
Posted June 06, 2011
You'll have to use profile software to get your buttons mapped. Most joysticks have this software on a disk that came with it when you purchased it. If you got the stick second hand, you should be able to download the software at the manufacturers website.
Launching missiles is accomplished by holding down button 2 and pulling the trigger. Holding down button 2 also activates roll on left to right movement of the stick and increases the throttle when you push forward and decreases the throttle when you pull back.
Download the manual and reference card under the games extras for more keyboard commands that can be mapped to a joystick with the appropriate profiler software.
Launching missiles is accomplished by holding down button 2 and pulling the trigger. Holding down button 2 also activates roll on left to right movement of the stick and increases the throttle when you push forward and decreases the throttle when you pull back.
Download the manual and reference card under the games extras for more keyboard commands that can be mapped to a joystick with the appropriate profiler software.
Post edited June 06, 2011 by pnptcn
Pat9496
New User
Registered: Apr 2010
From Liechtenstein
Posted June 06, 2011
high rated
Actually, you can define a mapper file for DOSBox and map joystick buttons to keyboard commands.
Or the other way around, actually.
Start the game and at any time (even before the game is completely started) press CTRL-F1.
This will bring you to the mapper screen. Now click on any function of the keyboard - for example "Return" (which is the key for missiles) and then "Add" to add a mapping. Now simply press the joystick button you want the be mapped to the return-key and you're done.
Click on "Save" and return to the game.
More infos about the mapper here: http://www.dosbox.com/wiki/Mapper
Or the other way around, actually.
Start the game and at any time (even before the game is completely started) press CTRL-F1.
This will bring you to the mapper screen. Now click on any function of the keyboard - for example "Return" (which is the key for missiles) and then "Add" to add a mapping. Now simply press the joystick button you want the be mapped to the return-key and you're done.
Click on "Save" and return to the game.
More infos about the mapper here: http://www.dosbox.com/wiki/Mapper
LaMaupin
New User
Registered: Jul 2009
From United States
Posted September 09, 2011
For Wing Commander, "fire missiles" is button 1 + button 2 pressed together, additionally. It's not as convenient as a single button press to fire missiles, though.
gamebin
Gaming Legend
Registered: May 2009
From United States
Posted September 10, 2011
I just use Xpadder.
scootio689
New User
Registered: Feb 2012
From United States
Thraka
Pent 1 for life
Registered: Jan 2009
From United States
hfrank
New User
Registered: Jan 2012
From United States
Posted May 07, 2019
Does anyone out there know how to configure the Thrustmaster T. Flight Stick X for Privateer 2? I can't get yaw (X-Axis control). In Privateer, the stick behaves nicely. Push it right or left and I get lateral movement. In Privateer 2, this causes roll.