That's right; have also still getting the same error message (despite patch v1. 04). I've currently uninstalled the game.

Sorry. No Support for Systems that does *not* reach the minimum PC Requirements. Thats waste of time.
The Requirements were set a way before release AND they are provided on the box! Dont buy it then, ask before!
-----

If the game dont start with overclocked (also overclocked defaults by vendor), first check if it is really stable with benchmarks like Valley or Heaven. With AMD CCC / MSI Afterburner or vendor sofware you can downclock your GPU for example.

Game runs fine on my "more" overclocked default overclocked R9 290 (Asus R9 290 DirectCU II OC)

Nothing in this world is a waste of time; otherwise, there is also no The Witcher. ;)

Thank you for your advice 'Dont buy it then, ask before!', but when The Witcher 3 does not support systems below the 'recommended' hardware specifications, then just not.
Unfortunately I could not help me to buy The Witcher 3; on the one hand because I already played the two predecessors, partly because I wanted to support the good work of CD project.

However I'm currently me, so the next two months, due to the introduction of the AMD R300-series, buy a new graphics card. Let's see what I can get then; a cheap R9 290 (ASUS R9 290 DirectCU II OC) would be a nice bargain. Have fun. ;)

i installed the sdk kit and still no dxcpl.exe to be found. also im running 11.1 already..

which sdk do you use / install?

I installed the windows sdk for windows 8.1

from here https://msdn.microsoft.com/de-de/windows/desktop/bg162891.aspx

PROBLEM EXCEPTION_ACCESS_VIOLATION (3221225477) SOLVED!!!

Uninstal Duet display and Kairos.

I don't have any of these programs, still have crashes :/

another application expanding display area? update or uninstal flash.

actualy those are they compatible dx11 or not , if they are not .. then the dx11 theory is dead

Will we ever get a fix for this? The game runs pretty flawless for hours, until I start (re-)loading savegames or use fast travel. That's when the crashes happen.

Red Engine Crash Log
--------------------------------------
Build: Not Set [ Compiled Jun 3 2015 ]

Crash reason: EXCEPTION_ACCESS_VIOLATION (3221225477), Error reading location 0xffffffff

Crashed Thread:

Thread ID: 116

callstack:
NVAPI_Thunk() + 0x790da - <Unknown File>(0)
NVAPI_Thunk() + 0x28f921 - <Unknown File>(0)
OpenAdapter12() + 0xc561d - <Unknown File>(0)
OpenAdapter12() + 0xd4a27 - <Unknown File>(0)
OpenAdapter12() + 0x3ac47 - <Unknown File>(0)
OpenAdapter12() + 0x4799b - <Unknown File>(0)
OpenAdapter12() + 0x47cdb - <Unknown File>(0)
OpenAdapter12() + 0x2ecc0 - <Unknown File>(0)
D3DKMTCloseAdapter() + 0x9e284 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xa89b - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0x546e - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x7b486 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb998e2 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb996ff - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x1ab77 - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x1a653 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb881b2 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb89b87 - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x9372a - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xbd62ab - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xbd3731 - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb8057b - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x25fb2 - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x25d2e - <Unknown File>(0)
Scaleform::Render::Matrix4x4<float>::SetIdentity() + 0xb62da0 - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x220b97 - <Unknown File>(0)
Scaleform::Render::Matrix2x4<float>::Prepend() + 0x220d3e - <Unknown File>(0)
BaseThreadInitThunk() + 0xd - <Unknown File>(0)
RtlUserThreadStart() + 0x21 - <Unknown File>(0)

I'm pretty confident that I've traced my crashes back to Galaxy. That's because it didn't crash at all when I started the game directly through the .exe.

THANK YOU SO MUCH!!!!!!!!!!!!!!

Im running an i7 with 12GB of RAM and an Intel HD 4000

I havent been able to get to the loading screen ever, it always crashed while starting but this fixed it.

I CAN FINALLY SEE THE LOADING SCREEN THANK YOU SO MUCH! :D

Yes! This fixed my crash on startup problem, too. ^_^ Thank you!

Now i get a clean and understandable error message from the game - I need a DX11 grapgic card. ;)

But ...

... if you have a problem during the installation of "SDK for Windows 7" ,e.g. the installation abort with "Installation Failed" -> then deinstall "Visual Studio 2010" on your computer! ([url=http://www.mathworks.com/matlabcentral/answers/95039-why-does-the-sdk-7-1-installation-fail-with-an-instal lation-failed-message-on-my-windows-system]more ...[/url])
... only "dxcpl.exe" works fine; "dxcpl_x86.exe" and "dxcpl_x64.exe" have not work for me! (... for more help looks also on "youtube" -> keyword "dxcpl.exe")

ps. of course, my graphic card is also too weak for The Witcher 3. ;))

fun