Posted December 04, 2018
stonky
New User
Registered: Nov 2014
From Canada
damson
New User
Registered: Apr 2009
From Poland
Azrapse
New User
Registered: Jan 2011
From Finland
Posted December 05, 2018
Best regards.
But if we will announce here if we are looking for more people.
damson
New User
Registered: Apr 2009
From Poland
Harh1981
New User
Registered: Mar 2018
From Russian Federation
Posted December 07, 2018
Sorry of no updates on the transport, was busy about more than month, just didn't have time... Hope to find some soon
Harh1981
New User
Registered: Mar 2018
From Russian Federation
Posted January 14, 2019
Unsure about any interest or not, but I'm still here. Just in case =)
Lower part of the transport is still a bit "raw", but overally I plan to leave it as it looks now. I've added certainly a noncanonical landing gear in front of the ship - when I've tried to think on what part this one would land, it looked that would be the front cannons. Something told me that doesn't look OK :) I'll try to make it not that obvious when detailing lower part of the ship. It is now 15K tris, but I'll make some optimizations at the end, it would eat about 3-4K
Lower part of the transport is still a bit "raw", but overally I plan to leave it as it looks now. I've added certainly a noncanonical landing gear in front of the ship - when I've tried to think on what part this one would land, it looked that would be the front cannons. Something told me that doesn't look OK :) I'll try to make it not that obvious when detailing lower part of the ship. It is now 15K tris, but I'll make some optimizations at the end, it would eat about 3-4K
Arohtar
New User
Registered: Oct 2018
From Spain
Azrapse
New User
Registered: Jan 2011
From Finland
Posted January 14, 2019
Lower part of the transport is still a bit "raw", but overally I plan to leave it as it looks now. I've added certainly a noncanonical landing gear in front of the ship - when I've tried to think on what part this one would land, it looked that would be the front cannons. Something told me that doesn't look OK :) I'll try to make it not that obvious when detailing lower part of the ship. It is now 15K tris, but I'll make some optimizations at the end, it would eat about 3-4K
kumonko
New User
Registered: Mar 2016
From Spain
Posted January 16, 2019
I look at the last page at this forum and moddb twice a week. I occasionally look at Trello, and search the xwau forum too.
Any update to this projct puts me closer to the controls of any craft in the sw universe than any idea Disney or EA have in mind right now.
There is interest. I'm sure I'm not alone...
Thank you, and thank you to the rest of the team.
Any update to this projct puts me closer to the controls of any craft in the sw universe than any idea Disney or EA have in mind right now.
There is interest. I'm sure I'm not alone...
Thank you, and thank you to the rest of the team.
Azrapse
New User
Registered: Jan 2011
From Finland
Posted January 16, 2019
Any update to this projct puts me closer to the controls of any craft in the sw universe than any idea Disney or EA have in mind right now.
There is interest. I'm sure I'm not alone...
Thank you, and thank you to the rest of the team.
We don't have a release date, because there is some work that needs to be done before we can even publish a little demo, and we can only put our free time onto this project.
We don't discuss the nature of this required work in public because it attracts undesirable activity and posts of the "gloom and doom" kind. But I bet you get the idea of what I am talking about.
Arohtar
New User
Registered: Oct 2018
From Spain
Posted January 16, 2019
to Azrapse and other devs, (maybe this forum is not the place, but I didn't knew how to contact you about this request)
I already said I would love to help and be part of your team. I was wondering what could I do that you don't already have and what I could do to be useful. Maybe it's not in your plans to introduce other languages, but I could translate to spanish.
Not only I'm a big fan who started to play xw when it was realeased, I was so young I didn't even knew english, because I'm Spain native, so I learned a lot playing. It's obvious that I'm also a bit fan so if I may I'd love to help you with that.
PS: Even if you reject me on this, I still think what you're doing is amazing.
Best regards fellow pilots
I already said I would love to help and be part of your team. I was wondering what could I do that you don't already have and what I could do to be useful. Maybe it's not in your plans to introduce other languages, but I could translate to spanish.
Not only I'm a big fan who started to play xw when it was realeased, I was so young I didn't even knew english, because I'm Spain native, so I learned a lot playing. It's obvious that I'm also a bit fan so if I may I'd love to help you with that.
PS: Even if you reject me on this, I still think what you're doing is amazing.
Best regards fellow pilots
Harh1981
New User
Registered: Mar 2018
From Russian Federation
Posted January 16, 2019
Thanks... To be honest, if it is possible, I would leave it to someone from your team. Reason: I didn't make textures specifically for the games at all. I've made textures, but for visualization only. I don't even know how to make unwrap (yeah, working in 3dsmax since 1997 and do not know it :)).
As for my vision of it, I would optimize the model, so it ready to be textured or at least as close to it as it could be and leave you the model. Or I don't really know how to make all this so everyone would not be upset with my work... Or I don't know then, we would need to figure that out.
As for the model itself, I think it is now close to being completed. It is 17K without any optimizations now. If you think I should alter something or add detail here and there, just tel - I may not properly look at the work I'm doing and maybe doing somethig wrong.
Yes, I remember you told me you don't really like such models to be 15-17K tris (even, as I told, I'll remove some backfacing and so on, so it would make the model 2-3K lower on tris), but as for that - I don't know. If you think there must be some parts that should be able to be toren apart if the ship is destroyed, also - just tell. I think there must be separate object for the front LG for animation purposes and maybe separate engines... Sorry, I've made this post in a bit haste since I need to go. Just uploading the bottom view with the updated model
As for my vision of it, I would optimize the model, so it ready to be textured or at least as close to it as it could be and leave you the model. Or I don't really know how to make all this so everyone would not be upset with my work... Or I don't know then, we would need to figure that out.
As for the model itself, I think it is now close to being completed. It is 17K without any optimizations now. If you think I should alter something or add detail here and there, just tel - I may not properly look at the work I'm doing and maybe doing somethig wrong.
Yes, I remember you told me you don't really like such models to be 15-17K tris (even, as I told, I'll remove some backfacing and so on, so it would make the model 2-3K lower on tris), but as for that - I don't know. If you think there must be some parts that should be able to be toren apart if the ship is destroyed, also - just tell. I think there must be separate object for the front LG for animation purposes and maybe separate engines... Sorry, I've made this post in a bit haste since I need to go. Just uploading the bottom view with the updated model
Azrapse
New User
Registered: Jan 2011
From Finland
Posted January 16, 2019
As for my vision of it, I would optimize the model, so it ready to be textured or at least as close to it as it could be and leave you the model. Or I don't really know how to make all this so everyone would not be upset with my work... Or I don't know then, we would need to figure that out.
As for the model itself, I think it is now close to being completed. It is 17K without any optimizations now. If you think I should alter something or add detail here and there, just tel - I may not properly look at the work I'm doing and maybe doing somethig wrong.
Yes, I remember you told me you don't really like such models to be 15-17K tris (even, as I told, I'll remove some backfacing and so on, so it would make the model 2-3K lower on tris), but as for that - I don't know. If you think there must be some parts that should be able to be toren apart if the ship is destroyed, also - just tell. I think there must be separate object for the front LG for animation purposes and maybe separate engines... Sorry, I've made this post in a bit haste since I need to go. Just uploading the bottom view with the updated model
I am not sure if we have told this story here, but some years ago we saw ourselves in the situation that 3 or 4 different people had started to work independently on the same model without telling us or collaborating between them. So we eneded up with 4 people each offering us their own made Lambda-class shuttle model.
Since then, we elaborated this document: https://docs.google.com/spreadsheets/d/1paGzo83dohy2R1RO6xxONWsHSeA-RXdJhxQb1E71sGM/edit?usp=sharing where people can check which assets we have, which are already in progress, and which are still needed.
We got a transport model kindly donated by the Fate of the Galaxy project team. The model has some issues with geometry and needed some work to fit our standards, so our "in house" 3d experts put it on the pile of work to do to review the model and assess how much work would it need, then do it.
Soon after this was the first time you offered your model, that was already halfways done. Honestly, I find the looks of your model outstanding. But we are again in the situation of having several people kindly offering their work to us for free and we having to decide what is similar to when your parents asked you "Who do you love most: daddy or mommy?" :S
Since both are still at a stage that aren't totally matching our needs, we are yet undecided of which will we end up using.
If yours is closer to meet the geometry requirements than the FotG one, we might opt for yours (even if it comes untextured). It depends very much on the amount of work that our 3D experts have to dedicate to them, since they are already overworked.
It would help if you could send us a download link to the current state of the model so that they can have a look at it and make some comments of towards where you should focus. Is that a possibility?
Azrapse
New User
Registered: Jan 2011
From Finland
Posted January 16, 2019
I already said I would love to help and be part of your team. I was wondering what could I do that you don't already have and what I could do to be useful. Maybe it's not in your plans to introduce other languages, but I could translate to spanish.
Not only I'm a big fan who started to play xw when it was realeased, I was so young I didn't even knew english, because I'm Spain native, so I learned a lot playing. It's obvious that I'm also a bit fan so if I may I'd love to help you with that.
PS: Even if you reject me on this, I still think what you're doing is amazing.
Best regards fellow pilots
We have plans to implement a localization system so that people can create and share the translation files for their own languages.
It's not trivial because the game builds up sentences dynamically based on events, amount of ships, ship types, etc that require a bit more advanced translation system than just a mapping of words for most languages.
We already have some Spanish speaker in the team that would take care of creating the localization file in that language. Similar to your backstory, he also learned most of the English he knows by playing TIE Fighter. :)
Do you have any 3D modelling or artistic skill, or some programming background?
Arohtar
New User
Registered: Oct 2018
From Spain
Posted January 16, 2019
I already said I would love to help and be part of your team. I was wondering what could I do that you don't already have and what I could do to be useful. Maybe it's not in your plans to introduce other languages, but I could translate to spanish.
Not only I'm a big fan who started to play xw when it was realeased, I was so young I didn't even knew english, because I'm Spain native, so I learned a lot playing. It's obvious that I'm also a bit fan so if I may I'd love to help you with that.
PS: Even if you reject me on this, I still think what you're doing is amazing.
Best regards fellow pilots
We have plans to implement a localization system so that people can create and share the translation files for their own languages.
It's not trivial because the game builds up sentences dynamically based on events, amount of ships, ship types, etc that require a bit more advanced translation system than just a mapping of words for most languages.
We already have some Spanish speaker in the team that would take care of creating the localization file in that language. Similar to your backstory, he also learned most of the English he knows by playing TIE Fighter. :)
Do you have any 3D modelling or artistic skill, or some programming background?