Posted March 10, 2019
My system is just built the day before yesterday (Friday Australia time) and I am running my GOG games from External USB disk where they are installed. GOG Galaxy has detected the game and has updated it but the first time I lauched it creashed to the desktop.
CPU - Ryzen 2600x, Grapghics - MSI RX580 8Gb OC Edition , MBoard -MSI X470 Gaming Plus. RAM - DDR4 16Gb 2666Mhz RAM. Only XMP is on and default performace mode from BIOS. Radion Settings is at default.
I am running WIndows 10 Pro. V1809 Bld 17763.348
I am currently verifying the installation.
How can I attached my error logs and crash dump for Unity.
UPDATE
OK the games files validated and the loading screen ran but the game got stuck on the LOGO screen and the hard drives churned away and there was no other screen. The system went into overdrive - the CPU and GPU heat was up to 80C, all the fans on full RPM and the noise was really loud. Had to force close the game.
May have to check the BIOS and reset to defaults to see if that helps.
CPU - Ryzen 2600x, Grapghics - MSI RX580 8Gb OC Edition , MBoard -MSI X470 Gaming Plus. RAM - DDR4 16Gb 2666Mhz RAM. Only XMP is on and default performace mode from BIOS. Radion Settings is at default.
I am running WIndows 10 Pro. V1809 Bld 17763.348
I am currently verifying the installation.
How can I attached my error logs and crash dump for Unity.
UPDATE
OK the games files validated and the loading screen ran but the game got stuck on the LOGO screen and the hard drives churned away and there was no other screen. The system went into overdrive - the CPU and GPU heat was up to 80C, all the fans on full RPM and the noise was really loud. Had to force close the game.
May have to check the BIOS and reset to defaults to see if that helps.
Post edited March 10, 2019 by AnthonyJAttard
No posts in this topic were marked as the solution yet. If you can help, add your reply