It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
Community
General discussion (archive)Shaky screen when playing full-screen games(7 posts)(7 posts)
(7 posts)
Pages:
1
This is my favourite topic
Posted April 12, 2012
My screen resolution is 1280x1024 on a CRT monitor. I find that whenever I launch most newly installed games for the first time, if the default resolution is ~1024x768, or lower, then my screen will shake left and right uncontrollably. Then when I make it to the options and set the resolution to 1280x1024 (or near that if 1280x1024 isn't available) then it pops back to the center and doesn't shake anymore.

However, in old games like Fallout and Planescape Torment that have no resolution settings, I can't do anything about the shaky screen issue. These games are unplayable for me because the screen shakiness is too much. For some reason though, Arcanum worked just fine for me, no shakiness. I played through that all the way to the end.

I'm still on Windows XP Pro SP3. Have a 17" Dell CRT and my video card is an ATI Radeon HD 4850.

Anybody know how to fix the screen shaking? I don't want to play with unofficial high-resolution patches. I like the charm of playing an old game at its default 640x480 (or whatever) resolution as the developer intended it to be played.
No posts in this topic were marked as the solution yet. If you can help, add your reply
Posted April 12, 2012
Have you installed the driver specific to that monitor? What cable connection are you using?
Posted April 12, 2012
avatar
HereForTheBeer: Have you installed the driver specific to that monitor? What cable connection are you using?
I always use the latest AMD video drivers, Steam has a convenient AMD video driver updater. The CRT is VGA, but I'm connected to the DVI port with a "VGA-to-DVI" adapter that came with the video card.
Posted April 12, 2012
Yes, but did you get the driver for the monitor itself? I've seen that the correct driver for my old NEC 21 inch CRT makes a difference in picture quality so the proper driver for your screen may have a positive effect on this problem.

If you have a VGA output from the card, you may want to give that a shot instead of using the convertor.
Posted April 13, 2012
avatar
N0Lif3: snip
My LCD monitor used to do that, and the answer was refresh rates. Try setting one of the lower resolutions (640x480) in Windows, and if it's shaking, go to advanced settings to change the refresh rate to some other value (check the manual of your monitor for which are acceptable) and see if that helps.

If you're lucky, the system will remember this setting and apply this refresh rate whenever a game switches to that resolution, solving your problem. Sometimes it just doesn't work, though.
Post edited April 13, 2012 by bazilisek
Posted April 13, 2012
avatar
bazilisek: go to advanced settings to change the refresh rate to some other value (50 or 60 Hz should be safe) and see if that helps.
With CRT monitors it's best to check the recommended refresh rate beforehand. The ones I used were usually in the 72 to 75 Hz range. This Dell, for example, is listed as 85 Hz.
Post edited April 13, 2012 by Kezardin
Posted April 13, 2012
avatar
Kezardin: With CRT monitors it's best to check the recommended refresh rate beforehand. The ones I used were usually in the 72 to 75 Hz range. This Dell, for example, is listed as 85 Hz.
You're right, of course; I edited my post. It's been far too long since I've dealt with CRTs.
Pages:
1
This is my favourite topic
Community
General discussion (archive)Shaky screen when playing full-screen games(7 posts)(7 posts)
(7 posts)