Posted November 14, 2012
This computer I'm building now is made up of parts from another one that was badly damaged by UPS and spares from other computers lurking around here, so that what I have access to regarding hard drives is as follows:
1 - 128 GB SSD drive.
1 - 256 GB SSD drive.
2 - 1.0TB Western Digital 7200RPM 64Mb cache rotating hard drives.
What would you recommend doing with these choices??? Set up the two 1.0TB at RAID 0 as the boot drive and have the SSD drives for data? Set up the 256 GB SSD as the boot and have the others for data, maybe with the 2 1.0TB drives running in RAID 1 for redundancy??? Maybe have the 128GB SSD as the boot drive and that's ALL it's for, while using the others for data??
I'm not sure what my best options are here. But my motherboard appears to have 6 SATA internal inputs (actually has 8, 6 SATA II [3Gb/s] and 2 SATA III [6Gb/s]), so with my 2 optical drives that leaves enough internal SATA inputs for all of those drives if it seemed like a good idea. LOTS OF ROOM to as it is a full tower case. What would some of you experts out there do if these were your options???
Thanks again for all the help. As I've already begun building (or rebuilding if that's more accurate) this thing I hope I won't be bothering you good folks too many more times, but you guys sure helped me with my last one, my first ever self build that is running GREAT GREAT GREAT!!!
1 - 128 GB SSD drive.
1 - 256 GB SSD drive.
2 - 1.0TB Western Digital 7200RPM 64Mb cache rotating hard drives.
What would you recommend doing with these choices??? Set up the two 1.0TB at RAID 0 as the boot drive and have the SSD drives for data? Set up the 256 GB SSD as the boot and have the others for data, maybe with the 2 1.0TB drives running in RAID 1 for redundancy??? Maybe have the 128GB SSD as the boot drive and that's ALL it's for, while using the others for data??
I'm not sure what my best options are here. But my motherboard appears to have 6 SATA internal inputs (actually has 8, 6 SATA II [3Gb/s] and 2 SATA III [6Gb/s]), so with my 2 optical drives that leaves enough internal SATA inputs for all of those drives if it seemed like a good idea. LOTS OF ROOM to as it is a full tower case. What would some of you experts out there do if these were your options???
Thanks again for all the help. As I've already begun building (or rebuilding if that's more accurate) this thing I hope I won't be bothering you good folks too many more times, but you guys sure helped me with my last one, my first ever self build that is running GREAT GREAT GREAT!!!
Post edited November 14, 2012 by OldFatGuy