Yeah.

I think Core Temp might display a physical core with 1 logical core at 100% utilisation and 1 logical core at 0% utilisation as just the physical core at 50% utilisation.

What I'm trying to say is, on your system Baldur's Gate 2 might be using ~98% of what it sees as the CPU.

---

The issue isn't that the game seems to be running a core at 100%, but rather that timppu's laptop seems to lack adequate cooling for its CPU (or has something preventing it from functioning properly) when it's running a core at full load and at full speed - which shouldn't be an issue for most PCs.

Yes it is.

First things first, you probably noticed that your CPU usage was _locked_ to ~50% all the time, right? Add to that what DreadMoth says later, ie. it doesn't go beyond 50% just because the game thinks it has already hit the 100% cap.

I tested BG and BG2 (GOG versions) on a few other PCs I have, and I got similar results on all:

ASUS G75VW (Windows 7/64bit): One of the four cores was locked to 50% all the time (ie. apparently what the game thinks is 100%). So the same case as with you then.

My old AMD XP 2000+ (1.66GHz single core) with ATI Radeon X800 Pro (Windows XP 32bit): core was locked to 100%.

Lenovo ThinkPad T400 (Windows 7/64bit): one of the two cores locked to 100%.

I decided not to try it on my ancient IBM ThinkPad T41 (single core, running Windows XP) as I didn't think it would bring any new data. Probably it would be locked to 100%.

All this points to the same: no matter how fast your CPU is, BG and BG2 try to use up all the CPU cycles they can find. Maybe they have a good reason to do that, I don't know, but it just seems somewhat excessive, considering that locking e.g. the T400 CPU speed to a much lower value still runs the game exactly the same, but just using much less power (and producing much less heat).

In all the aforementioned systems, Baldur's Gate 2 ran smooth and great with max settings. And why wouldn't it, as they are all well beyond the recommended max PC configurations of BG2 (which is about some 600MHz CPU with some low end 3D graphics card).

Yes, a number of old games exhibit such behavior. Another example are the I Spy games. Those are point & click, no 3D, etc.

Not quite. 100% CPU isn't all the same. Whatever BG2 is doing is a lot less stressful than e.g. calculating π.

Blowing out any dust is a good idea. A lot of laptops have broken designs and are not able to run at capacity for extended lengths of time.

Wrong. Wrong. Wrong.

Right.

Or perhaps they did well to write a game that would wring every bit of performance out of the system it was running on, and didn't account for the following 13 years of PC hardware development or even the fact that their game would still be played after all that time... ;)

LOL! At this point the only one who seems to agree with you anymore is you.

Considering that the game runs just as well, with all the bells and whistles, if I drop my PCs max CPU speed to a much lower value (so that BG2 can muster much less CPU cycles before hitting the 100% cap), it appears to me it is just wasting rest of the CPU power, for whatever reason. Maybe it is some kind of simple timing hack or something, wasting any extra CPU cycles that it doesn't need? Someone who is an actual games programmer knows better.

Diablo 2 and The Wheel of Time, two other games from the same era, seem to behave much better, ie. using more CPU power only when they really need it. With them the CPU utilization is not locked to e.g. 100% all the time, but it fluctuates all the time depending what is happening in the game, going much lower also on game menus etc.

While it is true that PCs should handle constant 100% CPU and GPU usage without any problems, it still just sounds wasteful and excessive to me if it is used with no good reason. For instance, I think people would mind if Windows always did the same if you are merely staring at an empty desktop, ie. your CPU and GPU would always be working overtime even though there isn't really anything for them to do.

Or to take a car analogy, if I noticed that my gear was stuck to second gear, which would cause my engine to go 6000 rpm on a highway at 80 km/h or more, I probably wouldn't be content with just "Well, I wouldn't worry about it if I were you. Your car engine is specced to handle constant 6000 rpm without breaking up, so why would you care if it is running at that all the time?". :)

Anyway, not much to do about it I guess, just have to deal with it. Maybe I'll set my older laptop's max CPU speed to a lower value whenever I run BG2, just so that I don't have to listen to the fan spinning at full speed without a good reason. :)

The main point of the original discussion was just to get a confirmation whether these games are really supposed to work this way (I think the answer is yes, so nothing wrong with the PCs where the CPU usage constantly hits 100% with these games), and why are they doing it (not known).

I know this is a very old thread but I found through google and may eventually help pthers who do the same.
I purchased populous 3 long time ago but was still playing my old copy on the laptop. I decided to install it on the windows tablet and the frame rate was very low. Tried some stuff untill I notice 1 of the 4 cores was always 100%, no matter what.

Simply right click on the desktop shortcut and remove the compatibility mode to WIN95. All cores are working and frame rate is good now.

Tried this, unfortunately either Win95 or Win98 compatibility makes the program run extremely slowly ,for some reason.

Removing all the compatibility to Win95 checkmarks, wich was on by default, did the trick for me at the time, run faster and no more 1 core at 100%.
If you're trying on Populous 3, the game suffered a major update to improve Windows 10 compatibility, and as far as I remember, no longer suffers this issue.

It's not the only game I came across with this behaviour, Metal Gear Substance (not the GOG version) and more recently Project Cars on the Steam Deck also suffer this issue and the only way I got around it was to limit the CPU performance so it won't turbo and waste a truckload of battery. Those games didn't had a issue with framerate though.

Sorry, I misread your first post as "enable" checkmarks, not remove. Therefore I obviously got the wrong result. The compatibilities are off by default for BG.
There's still no help, though I got some leads from another thread I created.

Necro-ing to say that I found a solution:

Go to task manager (CTRL + SHIFT + ESC), go to details, locate the bgmain.exe

Then right-click the bgmain.exe line, click on "set affinity" and click "all processors".

It also works with two or more processors, if the threads are from different cores.

This way, the load from BG will be split, and a single core won't overheat because 100% all the time.

BG will still use 1/n % of cpu, where n is the number of cores/threads.


Tip: first hit on my PC for a search about "task manager detail set affinity", with photos:

Open Task Manager. ...
Click “More details” ...
Right-click the app you want to modify and click “Go to details”
Right-click the app in the “Details” window and choose “Set affinity”
Select the cores/logical cores you'd like to assign to the program.

https://winbuzzer.com/2020/07/03/how-to-set-cpu-affinity-in-windows-10-with-task-manager-or-system-properties-xcxwbt/

You were right after all, Hickory

just config bgmain.exe to use all cores/threads on "set affinity" inside task manager.